Home›Shingle Weight Calculator

Roofing Shingle Weight Calculator

Calculate the weight of roofing shingles for your tear-off project. Enter your roof size or number of squares to instantly see total weight and the dumpster size you need.

🏠 Shingle Weight Calculator Updates instantly
I know my
—
Total pounds
—
Total tons
—
Est. bundles

Get a dumpster delivered to your job site — same-day available in most areas.

 Call for a Free Dumpster Quote
✓ Free  ·  Mon–Sat 8am–8pm ET  ·  Local provider

How much do shingles weigh?

Shingle weight depends on the type. Most residential roofs use architectural shingles, which weigh 70–80 lbs per bundle. Since a roofing square (100 sq ft) requires 3 bundles, that's roughly 210–240 lbs per square.

TypePer bundlePer square
3-tab asphalt~67.5 lbs~200 lbs
Architectural ★~75 lbs~225 lbs
Premium/designer~90 lbs~270 lbs

★ Most common on homes built after 1990

What dumpster for a roof tear-off?

Roofing tear-offs are one of the most common reasons to rent a dumpster. The right size depends on your roof square footage and the number of existing shingle layers.

Small roof (under 1,000 sq ft)

10-yard dumpster typically sufficient

Average home (1,500–2,500 sq ft)

15–20 yard dumpster recommended

Large home or multiple layers

20–30 yard, or call to discuss

FAQ
How much does a bundle of shingles weigh?+
A bundle of 3-tab shingles weighs about 65–70 lbs. Architectural shingles are 70–80 lbs per bundle. Premium shingles can weigh 80–100 lbs per bundle. It takes 3 bundles to cover one roofing square (100 sq ft).
How much does a square of shingles weigh?+
One roofing square (100 sq ft) of architectural shingles weighs approximately 210–240 pounds. 3-tab shingles weigh about 195–210 lbs per square. Use our calculator above for a precise estimate based on your roof size.
How many bundles of shingles fit in a 10-yard dumpster?+
A 10-yard dumpster can hold approximately 25–35 bundles of architectural shingles by weight before reaching the typical 1–2 ton weight limit. You can physically fit more, but weight is the limiting factor with shingles.
Can you mix shingles with other roofing debris?+
Yes — old felt paper, nails, and flashing can be mixed with shingles. However, some areas restrict shingle disposal or require separate recycling. Your local provider can advise on any local requirements.
How much do roof shingles weigh per square foot?+
Asphalt shingles weigh approximately 2.0–2.5 lbs per square foot for a single layer. Architectural (dimensional) shingles are at the higher end at about 2.2–2.5 lbs/sq ft. A 1,500 sq ft roof with one layer of architectural shingles weighs roughly 3,300–3,750 lbs (1.65–1.87 tons).
How much does a roofing square weigh?+
One roofing square (100 sq ft of roof surface) weighs approximately 200–250 lbs depending on shingle type. 3-tab shingles: ~195–210 lbs per square. Architectural shingles: ~220–250 lbs per square. Premium designer shingles: up to 300 lbs per square. Multiply your roof squares by the per-square weight to estimate your total load.
How many layers of shingles are on my roof?+
Most roofs have 1–2 layers of shingles. A second layer adds significantly to disposal weight. Two layers of architectural shingles on a 1,500 sq ft roof can weigh 7,000–9,000 lbs (3.5–4.5 tons) — more than most standard dumpster weight limits. The calculator above includes a "number of layers" field to account for this.
What size dumpster do I need for a roof replacement?+
For a typical 1,500–2,000 sq ft residential roof with one layer of shingles, a 10-yard dumpster is usually sufficient — the load weighs 3,000–5,000 lbs, within standard weight limits. For two-story homes, two layers, or larger roofs, step up to a 15-yard. Always tell your provider the roof size and number of layers when ordering.
Reference Table

Shingle Weight by Type & Volume — Quick Reference

Shingle Type Per Bundle Per Square (100 sq ft) Per 1,000 sq ft
3-tab asphalt65–70 lbs195–210 lbs1,950–2,100 lbs
Architectural (dimensional)70–80 lbs210–240 lbs2,100–2,400 lbs
Premium designer shingles80–100 lbs240–300 lbs2,400–3,000 lbs
Wood shakes~110 lbs~330 lbs~3,300 lbs
Slate tiles~400 lbs~700–1,500 lbsVery heavy — call provider

Weights are estimates for removal planning. Actual bundle weights vary by manufacturer and product line.

Doing a roof tear-off? Get a dumpster quote.

Same-day delivery available in most areas. Licensed local providers, no hidden fees.

 Call for a Free Dumpster Quote
✓ Free  ·  Mon–Sat 8am–8pm ET  ·  Local provider